Skip to main content

Windows – How to move the recovery partition on Windows 10

According to MS's documentation, capture-and-apply-windows-system-and-recovery-partitions, the recovery partition can be captured and applied to a new partition. I have made it to work on my windows 10 PC.

Warning 1: You must know what the following commands do before you execute them. Check the link above and MS's documentation for diskpart, dism and reagentc.

Warning 2: Check disk numbers, partition numbers and volume letters carefully before executing commands.
Use diskpart to find current recovery partition and assign a driver letter(eg. O) to it (following should be entered into diskpart terminal):

DISKPART> list disk 

DISKPART> select disk <the-number-of-disk-where-current-recovery-partition-locate> 

DISKPART> list partition 

DISKPART> select partition <the-number-of-current-recovery-partition> 

DISKPART> assign letter=O

Create an image file from current recovery partition:

Dism /Capture-Image /ImageFile:C:\recovery-partition.wim /CaptureDir:O:\ /Name:"Recovery"

Apply the created image file to another partition(eg. N) that will become the new recovery partition:

Dism /Apply-Image /ImageFile:C:\recovery-partition.wim /Index:1 /ApplyDir:N:\

Register the location of the recovery tools:

reagentc /disable 

reagentc /setreimage /path N:\Recovery\WindowsRE 

reagentc /enable

Use diskpart to hide the recovery partition:

DISKPART> select volume N 

DISKPART> set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac" 

DISKPART> gpt attributes=0x8000000000000001 

DISKPART> remove


DISKPART> select volume N 

DISKPART> set id=27 

DISKPART> remove

Reboot the computer, now the new recovery partition should be working
(Optional) Delete the old recovery partition:

DISKPART> select volume O 

DISKPART> delete partition override

(Optional) Check if the recovery partition is working:
Show the current status:

reagentc /info

Specifies that Windows RE starts automatically the next time the system starts:

reagentc /boottore

Reboot the computer and do your stuff in Windows RE (eg. enter CMD and run some tools)





You may also interested in reading: